Etch Primer (A+B)

Etch Primer (A+B)


It is a pre-treatment primer on non-ferrous metals such as bronze and aluminum as well as zinc and galvanized iron. It is used as pre-treatment primer on blast-cleaned steel plates.

All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied. Remove all loose, and failing or suspect paint. Feather edges of sound paint. Remove all dust and all rust

Color Range: Yellow.

Packaging: 4 & 20 liters.

Product overview


Apply one to two coats as required.


Stir well before use. Apply by brush or roller to an even thickness and Air Spray for smooth finishing.


  • Drying Time: Under normal drying conditions touch dry in 1 hours, recoat it after 2 hours.
  • Finish: Flat.
  • Spreading Rate: Up to 10m² per liter on smooth surfaces.
  • Limitations: For Exterior & Interior use.